01
Check Compatibility
Confirm that the filter or pump discharge outlet is compatible with a 2-inch hose.
Garvee 2" × 100' Pool Backwash Hose, Heavy-Duty 3-Layer PVC Lay-Flat Drain Hose with 2 Metal Clamps for Pool Cleaning & Drainage, Blue
2 in × 100 FT Reinforced PVC Backwash Hose
Move Pool Water Farther with a Flexible, Heavy-Duty Discharge Hose
Connect the 100-foot lay-flat hose to compatible pool filters or discharge pumps for backwashing, draining, water transfer and outdoor maintenance.
2 in Nominal hose diameter
100 FT
Extended discharge reach
3 Layers
Reinforced PVC construction
2 Clamps
Metal fittings included
Designed for Faster, Cleaner Pool Maintenance
Direct discharged water away from the pool, filtration equipment, patio and landscaped areas with a long, highly visible blue hose.
Long Discharge Reach
Routes water farther away from the pool and surrounding outdoor area.
High-Volume Diameter
Supports efficient water flow through compatible 2-inch connections.
Reinforced Material
Durable PVC helps resist kinking, tearing and abrasion during outdoor use.
High Visibility
Bright blue color makes the hose easier to identify around the pool area.
3-Layer Reinforced PVC Construction
Multiple bonded layers provide a more durable discharge path for repeated backwashing, draining and water-transfer tasks.
Durable Outer Surface
Helps resist scraping and abrasion when the hose is laid across outdoor surfaces.
Reinforced Center Layer
Adds structural support to help reduce stretching and deformation during discharge.
Smooth Water Path
The inner PVC surface supports consistent water movement through the hose.
Seasonal Outdoor Reliability
Suitable for regular pool cleaning, drainage and maintenance applications.
Three Reinforced Layers Working Together
The layered construction balances water handling, flexibility and durability for demanding outdoor discharge work.
01
Protective Outer Layer
Helps guard the hose against dirt, dragging and normal surface abrasion.
02
Reinforced Middle Layer
Supports hose shape and durability during active water discharge.
03
Smooth Inner Layer
Provides a continuous interior path for efficient water transfer.
Built for Demanding Water Discharge
The reinforced lay-flat hose is designed to carry discharged water from compatible pool filters, pumps and drainage equipment.
Pool Filter Backwashing
Carries dirty filter water away from the pool and equipment area.
Pool and Hot Tub Draining
Routes water toward an appropriate approved drainage location.
Sump Pump Discharge
Connects to compatible 2-inch pump outlets for temporary water removal.
Outdoor Water Transfer
Supports irrigation, construction drainage and general utility applications.
Secure Clamp-On Installation
Two included metal clamps help fasten the hose to compatible 2-inch discharge fittings.
2 Metal Clamps
Includes the hardware needed to secure the hose around a compatible outlet.
Leak-Resistant Fit
Proper clamp placement helps reduce movement and leakage at the connection.
Quick Removal
Loosen the clamps after use to disconnect, drain and store the hose.
Easy to Connect, Drain, Coil and Store
The flexible lay-flat design expands as water moves through the hose, then flattens again after draining for compact storage.
Lay-Flat Operation
Position the hose along the planned discharge route before starting the pump.
Flexible Routing
Guide the hose around compatible pool equipment and outdoor obstacles.
Compact Coiling
Roll the fully drained hose into a compact coil when maintenance is complete.
Space-Saving Storage
Store the coiled hose in a pool shed, garage or maintenance cabinet.
Four-Step Backwash Hose Setup
Confirm the hose diameter and discharge location before operating the pool filter or pump.
02
Attach the Hose
Slide the hose over the outlet and secure it evenly with the metal clamp.
03
Lay Out the Full Length
Route the hose toward an approved discharge area without sharp bends or twists.
04
Drain and Store
Shut off the equipment, release remaining water and coil the dry hose for storage.
One Hose for Multiple Water-Transfer Tasks
Use the reinforced blue discharge hose for pool maintenance and other compatible outdoor drainage applications.
Pool Filter Backwashing
Direct discharged water away from pool equipment during routine sand or DE filter cleaning.
Marine and Utility Discharge
Supports compatible water-transfer and drainage equipment in outdoor or marine maintenance environments.
Site and Sump Pump Drainage
Route unwanted water away from low areas using a compatible temporary discharge pump.
Garden and Agricultural Irrigation
Transfers water to suitable irrigation or utility areas when connected to compatible equipment.
Flexible Storage Between Pool Maintenance Jobs
Drain the hose completely before coiling to help reduce trapped water, mildew and unnecessary storage weight.
Drain Completely
Lift the hose gradually to release remaining water before coiling.
Coil Without Sharp Folds
Roll the hose loosely to help prevent creases and stress points.
Store Dry and Shaded
Keep the hose away from sharp tools, chemicals and prolonged direct sunlight.
Key Product Details
Confirm the 2-inch connection size and required discharge distance before installing the hose.
Size and Construction
- Hose Diameter 2 in
- Hose Length 100 ft. / 1,200 in
- Material Reinforced PVC
- Construction 3-Layer Design
- Hose Style Lay Flat
- Color Blue
Connections and Package
- Connection Type Clamp On
- Metal Clamps 2 Included
- Item Weight 15.2 lb.
- Coiled Size Approx. 12.6 × 12.6 in
- Primary Use Water Discharge
- Usage Location Outdoor
Connection and Water-Discharge Safety Reminder
Confirm the pump or filter outlet size before installation. Fully unroll the hose and remove twists before starting water flow. Tighten the clamps securely without damaging the PVC. Never disconnect the hose while the system is pressurized, and discharge water only into locations permitted by local regulations.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Garvee 2" × 100' Pool Backwash Hose, Heavy-Duty 3-Layer PVC Lay-Flat Drain Hose with 2 Metal Clamps for Pool Cleaning & Drainage, Blue
Garvee 2" × 100' Pool Backwash Hose, Heavy-Duty 3-Layer PVC Lay-Flat Drain Hose with 2 Metal Clamps for Pool Cleaning & Drainage, Blue
2 in × 100 FT Reinforced PVC Backwash Hose
Move Pool Water Farther with a Flexible, Heavy-Duty Discharge Hose
Connect the 100-foot lay-flat hose to compatible pool filters or discharge pumps for backwashing, draining, water transfer and outdoor maintenance.
2 in Nominal hose diameter
100 FT
Extended discharge reach
3 Layers
Reinforced PVC construction
2 Clamps
Metal fittings included
Designed for Faster, Cleaner Pool Maintenance
Direct discharged water away from the pool, filtration equipment, patio and landscaped areas with a long, highly visible blue hose.
Long Discharge Reach
Routes water farther away from the pool and surrounding outdoor area.
High-Volume Diameter
Supports efficient water flow through compatible 2-inch connections.
Reinforced Material
Durable PVC helps resist kinking, tearing and abrasion during outdoor use.
High Visibility
Bright blue color makes the hose easier to identify around the pool area.
3-Layer Reinforced PVC Construction
Multiple bonded layers provide a more durable discharge path for repeated backwashing, draining and water-transfer tasks.
Durable Outer Surface
Helps resist scraping and abrasion when the hose is laid across outdoor surfaces.
Reinforced Center Layer
Adds structural support to help reduce stretching and deformation during discharge.
Smooth Water Path
The inner PVC surface supports consistent water movement through the hose.
Seasonal Outdoor Reliability
Suitable for regular pool cleaning, drainage and maintenance applications.
Three Reinforced Layers Working Together
The layered construction balances water handling, flexibility and durability for demanding outdoor discharge work.
01
Protective Outer Layer
Helps guard the hose against dirt, dragging and normal surface abrasion.
02
Reinforced Middle Layer
Supports hose shape and durability during active water discharge.
03
Smooth Inner Layer
Provides a continuous interior path for efficient water transfer.
Built for Demanding Water Discharge
The reinforced lay-flat hose is designed to carry discharged water from compatible pool filters, pumps and drainage equipment.
Pool Filter Backwashing
Carries dirty filter water away from the pool and equipment area.
Pool and Hot Tub Draining
Routes water toward an appropriate approved drainage location.
Sump Pump Discharge
Connects to compatible 2-inch pump outlets for temporary water removal.
Outdoor Water Transfer
Supports irrigation, construction drainage and general utility applications.
Secure Clamp-On Installation
Two included metal clamps help fasten the hose to compatible 2-inch discharge fittings.
2 Metal Clamps
Includes the hardware needed to secure the hose around a compatible outlet.
Leak-Resistant Fit
Proper clamp placement helps reduce movement and leakage at the connection.
Quick Removal
Loosen the clamps after use to disconnect, drain and store the hose.
Easy to Connect, Drain, Coil and Store
The flexible lay-flat design expands as water moves through the hose, then flattens again after draining for compact storage.
Lay-Flat Operation
Position the hose along the planned discharge route before starting the pump.
Flexible Routing
Guide the hose around compatible pool equipment and outdoor obstacles.
Compact Coiling
Roll the fully drained hose into a compact coil when maintenance is complete.
Space-Saving Storage
Store the coiled hose in a pool shed, garage or maintenance cabinet.
Four-Step Backwash Hose Setup
Confirm the hose diameter and discharge location before operating the pool filter or pump.
01
Check Compatibility
Confirm that the filter or pump discharge outlet is compatible with a 2-inch hose.
02
Attach the Hose
Slide the hose over the outlet and secure it evenly with the metal clamp.
03
Lay Out the Full Length
Route the hose toward an approved discharge area without sharp bends or twists.
04
Drain and Store
Shut off the equipment, release remaining water and coil the dry hose for storage.
One Hose for Multiple Water-Transfer Tasks
Use the reinforced blue discharge hose for pool maintenance and other compatible outdoor drainage applications.
Pool Filter Backwashing
Direct discharged water away from pool equipment during routine sand or DE filter cleaning.
Marine and Utility Discharge
Supports compatible water-transfer and drainage equipment in outdoor or marine maintenance environments.
Site and Sump Pump Drainage
Route unwanted water away from low areas using a compatible temporary discharge pump.
Garden and Agricultural Irrigation
Transfers water to suitable irrigation or utility areas when connected to compatible equipment.
Flexible Storage Between Pool Maintenance Jobs
Drain the hose completely before coiling to help reduce trapped water, mildew and unnecessary storage weight.
Drain Completely
Lift the hose gradually to release remaining water before coiling.
Coil Without Sharp Folds
Roll the hose loosely to help prevent creases and stress points.
Store Dry and Shaded
Keep the hose away from sharp tools, chemicals and prolonged direct sunlight.
Key Product Details
Confirm the 2-inch connection size and required discharge distance before installing the hose.
Size and Construction
- Hose Diameter 2 in
- Hose Length 100 ft. / 1,200 in
- Material Reinforced PVC
- Construction 3-Layer Design
- Hose Style Lay Flat
- Color Blue
Connections and Package
- Connection Type Clamp On
- Metal Clamps 2 Included
- Item Weight 15.2 lb.
- Coiled Size Approx. 12.6 × 12.6 in
- Primary Use Water Discharge
- Usage Location Outdoor
Connection and Water-Discharge Safety Reminder
Confirm the pump or filter outlet size before installation. Fully unroll the hose and remove twists before starting water flow. Tighten the clamps securely without damaging the PVC. Never disconnect the hose while the system is pressurized, and discharge water only into locations permitted by local regulations.
$17.50
Original: $49.99
-65%Garvee 2" × 100' Pool Backwash Hose, Heavy-Duty 3-Layer PVC Lay-Flat Drain Hose with 2 Metal Clamps for Pool Cleaning & Drainage, Blue—
$49.99
$17.50Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
2 in × 100 FT Reinforced PVC Backwash Hose
Move Pool Water Farther with a Flexible, Heavy-Duty Discharge Hose
Connect the 100-foot lay-flat hose to compatible pool filters or discharge pumps for backwashing, draining, water transfer and outdoor maintenance.
2 in Nominal hose diameter
100 FT
Extended discharge reach
3 Layers
Reinforced PVC construction
2 Clamps
Metal fittings included
Designed for Faster, Cleaner Pool Maintenance
Direct discharged water away from the pool, filtration equipment, patio and landscaped areas with a long, highly visible blue hose.
Long Discharge Reach
Routes water farther away from the pool and surrounding outdoor area.
High-Volume Diameter
Supports efficient water flow through compatible 2-inch connections.
Reinforced Material
Durable PVC helps resist kinking, tearing and abrasion during outdoor use.
High Visibility
Bright blue color makes the hose easier to identify around the pool area.
3-Layer Reinforced PVC Construction
Multiple bonded layers provide a more durable discharge path for repeated backwashing, draining and water-transfer tasks.
Durable Outer Surface
Helps resist scraping and abrasion when the hose is laid across outdoor surfaces.
Reinforced Center Layer
Adds structural support to help reduce stretching and deformation during discharge.
Smooth Water Path
The inner PVC surface supports consistent water movement through the hose.
Seasonal Outdoor Reliability
Suitable for regular pool cleaning, drainage and maintenance applications.
Three Reinforced Layers Working Together
The layered construction balances water handling, flexibility and durability for demanding outdoor discharge work.
01
Protective Outer Layer
Helps guard the hose against dirt, dragging and normal surface abrasion.
02
Reinforced Middle Layer
Supports hose shape and durability during active water discharge.
03
Smooth Inner Layer
Provides a continuous interior path for efficient water transfer.
Built for Demanding Water Discharge
The reinforced lay-flat hose is designed to carry discharged water from compatible pool filters, pumps and drainage equipment.
Pool Filter Backwashing
Carries dirty filter water away from the pool and equipment area.
Pool and Hot Tub Draining
Routes water toward an appropriate approved drainage location.
Sump Pump Discharge
Connects to compatible 2-inch pump outlets for temporary water removal.
Outdoor Water Transfer
Supports irrigation, construction drainage and general utility applications.
Secure Clamp-On Installation
Two included metal clamps help fasten the hose to compatible 2-inch discharge fittings.
2 Metal Clamps
Includes the hardware needed to secure the hose around a compatible outlet.
Leak-Resistant Fit
Proper clamp placement helps reduce movement and leakage at the connection.
Quick Removal
Loosen the clamps after use to disconnect, drain and store the hose.
Easy to Connect, Drain, Coil and Store
The flexible lay-flat design expands as water moves through the hose, then flattens again after draining for compact storage.
Lay-Flat Operation
Position the hose along the planned discharge route before starting the pump.
Flexible Routing
Guide the hose around compatible pool equipment and outdoor obstacles.
Compact Coiling
Roll the fully drained hose into a compact coil when maintenance is complete.
Space-Saving Storage
Store the coiled hose in a pool shed, garage or maintenance cabinet.
Four-Step Backwash Hose Setup
Confirm the hose diameter and discharge location before operating the pool filter or pump.
01
Check Compatibility
Confirm that the filter or pump discharge outlet is compatible with a 2-inch hose.
02
Attach the Hose
Slide the hose over the outlet and secure it evenly with the metal clamp.
03
Lay Out the Full Length
Route the hose toward an approved discharge area without sharp bends or twists.
04
Drain and Store
Shut off the equipment, release remaining water and coil the dry hose for storage.
One Hose for Multiple Water-Transfer Tasks
Use the reinforced blue discharge hose for pool maintenance and other compatible outdoor drainage applications.
Pool Filter Backwashing
Direct discharged water away from pool equipment during routine sand or DE filter cleaning.
Marine and Utility Discharge
Supports compatible water-transfer and drainage equipment in outdoor or marine maintenance environments.
Site and Sump Pump Drainage
Route unwanted water away from low areas using a compatible temporary discharge pump.
Garden and Agricultural Irrigation
Transfers water to suitable irrigation or utility areas when connected to compatible equipment.
Flexible Storage Between Pool Maintenance Jobs
Drain the hose completely before coiling to help reduce trapped water, mildew and unnecessary storage weight.
Drain Completely
Lift the hose gradually to release remaining water before coiling.
Coil Without Sharp Folds
Roll the hose loosely to help prevent creases and stress points.
Store Dry and Shaded
Keep the hose away from sharp tools, chemicals and prolonged direct sunlight.
Key Product Details
Confirm the 2-inch connection size and required discharge distance before installing the hose.
Size and Construction
- Hose Diameter 2 in
- Hose Length 100 ft. / 1,200 in
- Material Reinforced PVC
- Construction 3-Layer Design
- Hose Style Lay Flat
- Color Blue
Connections and Package
- Connection Type Clamp On
- Metal Clamps 2 Included
- Item Weight 15.2 lb.
- Coiled Size Approx. 12.6 × 12.6 in
- Primary Use Water Discharge
- Usage Location Outdoor
Connection and Water-Discharge Safety Reminder
Confirm the pump or filter outlet size before installation. Fully unroll the hose and remove twists before starting water flow. Tighten the clamps securely without damaging the PVC. Never disconnect the hose while the system is pressurized, and discharge water only into locations permitted by local regulations.
